High-Performance Zirconia Tube Solutions for Demanding Industries
ADCERAX manufactures custom zirconia ceramic tubes for industrial equipment and precision assemblies. Options include open-ended, closed-end, single-bore and multi-bore designs to suit different component requirements.
Our team reviews material grade, dimensions, surface finish and critical fits against your drawings and operating conditions, helping you select a suitable tube configuration for your application.
Find the zirconia tube form for a continuous passage, protective tip or precision fit. ADCERAX supplies open-ended and closed-end YSZ tubes, plus single-bore and multi-bore Mg-PSZ components for custom and small-batch orders.
±0.2 mm
Dimensional Accuracy Control
Made to Your Drawings
What Are Ceramic Inserts?
A zirconia tube is a hollow ceramic component made from zirconium dioxide (ZrO₂), typically stabilized with yttria or magnesia. These zirconia ceramic tubes are used in industrial equipment where wear resistance, mechanical strength and chemical compatibility are important.
An yttria-stabilized zirconia tube can offer different properties depending on its composition. Material selection should match the operating temperature, chemical environment and mechanical loads, as toughness and electrical insulation vary by grade.
Start with three choices
What is the purchased part?
A bare tube or sleeve, a probe/sensor assembly, or a filtration membrane element?
Which geometry is needed?
A through-bore, a closed tip, one bore in a short component, or several separate bore paths?
What must it do?
Choose structural protection, guidance, wear, oxygen-ion function, or liquid separation as your primary task.
Choose a Zirconia Tube Form
Start with the end form and bore layout, then compare the available model dimensions on the linked product pages. Each route supports a distinct assembly task and a drawing-based enquiry.
A continuous passage for drawing-defined sleeves, guides and process-flow components. Explore 43 published models and compare the OD/ID pair with your required fit.
A ceramic closed tip for protection and insertion work. Compare the published OD/ID options, then specify usable internal depth and tip geometry on the drawing.
Compact single-bore sleeves for mechanical fit and wear-duty review. Six published models give concrete OD/ID/length starting points for the mating-part drawing.
Compact components with 2, 4 or 6 separate bore paths for spacing and routing tasks. Six published models show bore count and paired dimensions; add a hole-position drawing for the selected form.
Need liquid filtration?
Explore the separate zirconia ceramic membrane element for MF/UF for porous-support, separation-layer and feed-performance selection.
Technical Specification of Zirconia Tube
Choose the material route by function, then match the grade, tube form and drawing to the operating conditions. The four references below support a focused grade discussion.
| Material reference | Selection direction | Project focus |
|---|---|---|
| AD-ZRO-3Y · 3Y-TZP | Structural, wear and fit requirements | Match the grade to loads, contact conditions and water/steam exposure. |
| AD-ZRO-8Y · 8Y-FSZ | Oxygen-ion functional component development | For oxygen-ion development, define temperature, oxygen partial pressure, electrodes, seals and functional tests as an assembly. |
| AD-ZRO-MG · Mg-PSZ | Structural and thermal-cycling selection review | Use the published short-component forms as a starting point; submit other geometry and support requirements for drawing review. |
| AD-ZRO-CA · Ca-PSZ | Configuration-specific material discussion | Discuss Ca-PSZ for a defined function and drawing; the linked product routes cover YSZ and Mg-PSZ forms. |
Typical material data for initial grade comparison
| Property and condition | AD-ZRO-3Y | AD-ZRO-8Y | AD-ZRO-MG | AD-ZRO-CA |
|---|---|---|---|---|
| Typical bulk density, g/cm³ | 6.00–6.08 | 5.90 | 5.70–5.80 | 5.60–5.75 |
| Typical flexural strength at 20°C, MPa | 800–1000 | 300 | 500–755 | 400–600 |
| Typical Vickers hardness, GPa | 12.5 | 12.3 | 11.5 | 10–11 |
| Typical fracture toughness KIC at 20°C, MPa·m½; method-dependent | 7.2–9.0 | 3.5–4.0 | 6–12 | 5–8 |
Ready to Discuss Your Zirconia Tube Needs?
At ADCERAX, we are committed to providing complete solutions for your engineering projects.
Our team supports you with technical drawings, customization options, and fast delivery to meet demanding requirements.
Whether you need open both ends or one end closed Zirconia Tube, we ensure consistent quality and global supply.
Choose Zirconia Tubes by application and service conditions
Match the task to a tube form first. The routes below show which geometry or material distinction matters for each application.
Process and chemical equipment
An open-ended YSZ form provides a continuous process passage; a closed-end form provides a protective tip around an inserted component. Grade selection follows the contacting medium, temperature and cleaning cycle; connections and supports define the assembly review.
Furnace and thermal assemblies
Choose an open-ended form for a process path or a closed-end form for an inserted component needing a protective tip. The grade and tube geometry are assessed together with continuous and peak temperatures, atmosphere, thermal gradients and supports.
Laboratory and precision assemblies
A single-bore Mg-PSZ short sleeve supports mechanical-fit and wear-duty selection; a multi-bore short component provides 2, 4 or 6 separate paths. Mating dimensions and working surfaces control the fit, while contact motion, loads and medium guide material selection.
Sensor and component development
A closed-end YSZ form offers a protective tip for probe development. For an oxygen-ion functional component, 8Y-FSZ is a material route for discussion; temperature, gas environments, electrodes, seals and assembly tests define the functional specification.
Drawing-Based Zirconia Tube Supply, from Samples to Repeat Orders
ADCERAX combines ceramic manufacturing, finishing and inspection planning around the tube you need. Published model dimensions provide starting points; the approved drawing controls your order.
| Capability | Project value |
|---|---|
| Form and material review | Match an open or closed end, bore layout and grade to the assembly task. |
| Machining and finishing | Assess cutting, grinding, detailed features and surface finish against the drawing. |
| Samples and small batches | Plan a trial part and evaluation path before repeat supply. |
| Inspection records | Arrange agreed dimensional, visual, material and application-specific checks. |
Quality-system and project documentation
Our production partner CS Ceramic CO., Ltd. holds ISO 9001:2015 quality-system certification (Registration: CN-00226Q05489R501), covering ceramic products and laboratory accessories.
Specify the material, dimensional or project-specific compliance records required with your order. ADCERAX can review applicable testing and documentation during quotation.
Custom Zirconia Tubes and Short Components
Combine geometry, material and working conditions in one drawing. ADCERAX reviews the complete feature combination for custom supply.
Customization Options
Review OD, ID, overall length, wall thickness, internal depth and bore layout together.
Define critical fits, datums, straightness, concentricity/coaxiality and end-face requirements.
Review closed tips, steps, flanges, grooves, holes, threads and edges against the drawing.
Match grade or composition to structural or functional duty.
Review as-sintered, ground or polished finishes for roughness, mating, sealing or electrode zones.
Customization Process
01
Start the enquiry:
use the known product or application to begin; the guidance below separates first contact from engineering details.
02
Review and plan samples:
agree the material/configuration, critical features, trial quantity, evaluation method and schedule before committing to the sample order.
03
Validate and control the specification:
Use dimensional and application tests to resolve sample findings, then lock the drawing, material and acceptance requirements for repeat production.
04
Inspect, pack and deliver:
agree the order-specific records, protection of edges and ends, packaging and delivery requirements. Shipment timing follows the confirmed order plan.
Frequently Asked Questions about Zirconia Tubes
Start with the required function. Structural wear and fit requirements differ from the oxygen-ion conductivity and leakage requirements of an electrolyte tube; confirm the exact grade before comparing dimensions or properties.
No. Tube integrity, bottom geometry, joints and the specified leak test all affect the result; a closed end alone does not establish pressure capability or sensor performance.
State the contact medium, concentration, temperature, atmosphere, exposure time and thermal cycle. Compatibility and service limits need to be reviewed for the selected grade and tube geometry.
Assign tolerances to the features that control assembly, including the relevant datums and working surfaces. OD, ID, straightness, coaxiality and surface finish are different requirements; final acceptance criteria are agreed after drawing review.
The material resists most acids and alkalis except hydrofluoric acid. This ensures long-term reliability in aggressive chemical environments. A Zirconia Tube provides protection where metals would degrade.
Provide an unworn reference dimension or drawing where possible, together with sample photos, the mating-part details and the failure history. Wear can change the measured geometry, so a used sample alone does not establish the original fit or guarantee interchangeability.
Compare the required wear behavior, toughness, electrical function and thermal conditions for the specific grades. Zirconia is not a universal replacement for alumina, and tube geometry and assembly constraints must be assessed with the material.
Zirconia Tubes offer higher fracture toughness and better thermal shock resistance. They are less brittle and more durable under stress. This makes zirconia a superior option in critical applications.
Request a Zirconia Tube Quote
Share your tube drawing, dimensions and operating conditions.
- Tube Type: Open-ended, closed-end, single-bore or multi-bore.
- Grade: 3Y-TZP, 8YSZ, Mg-PSZ, Ca-PSZ, or help choosing.
- Dimensions: OD, ID, length, bore layout and critical tolerances.
- Conditions: Application, temperature, medium, atmosphere and thermal cycling.
- Order: Quantity, delivery requirements and destination.
Replacing an existing tube? Send a photo or drawing and describe the problem.
*Our team will answer your inquiries within 24 hours.
*Your information will be kept strictly confidential.
Discuss your next zirconia tube project with ADCERAX
Looking for a reliable zirconia tube supplier? Let us help you with your next project.
info@adcerax.com
Tel.:+86-0731-84428843
WhatsApp:+86 19311583352
Within 24 hours
